PLC control steel tube machine line factory Share where PLC is applicable

2022-11-04


Although PLC is a control device specially used in the field, PLC control steel tube machine line factory found that many measures have been taken in the design and manufacture to make it more suitable for the industrial environment, but in order to ensure the stability and reliability of the whole system, the PLC should be used as much as possible. Have good working environment conditions and take necessary anti-interference measures.

  Although PLC is a control device specially used in the field, PLC control steel tube machine line factory found that many measures have been taken in the design and manufacture to make it more suitable for the industrial environment, but in order to ensure the stability and reliability of the whole system, the PLC should be used as much as possible. Have good working environment conditions and take necessary anti-interference measures.

PLC control steel tube machine line factory

  PLC is suitable for most industrial sites, but PLC control steel tube machine line factory believes that it still has certain requirements for use occasions, ambient temperature, etc. Controlling the working environment of PLC can effectively improve its working efficiency and life. PLC control steel tube machine line factory reminds to avoid the following places when installing PLC:

  (1) The ambient temperature exceeds the range of 0 ~ 50 °C; (2) The relative humidity exceeds 85% or there is dew condensation (caused by sudden changes in temperature or other factors); (3) Direct sunlight; (4) Corrosion and flammable gases, such as hydrogen chloride, hydrogen sulfide, etc.; (5) Look at iron filings and dust; (6) Frequent or continuous vibration, the vibration frequency is 10 ~ 55Hz, and the amplitude is 0.5mm (peak-peak); ( 7) Shocks exceeding 10g (acceleration of gravity).

  PLC control steel tube machine line factory reminds that in order to avoid electrical interference from other peripheral equipment, the programmable controller should be kept away from high-voltage power lines and high-voltage equipment as much as possible, and at least 200mm should be left between the programmable controller and the high-voltage equipment and power lines. distance.

Keywords:

PLC,control,steel,tube,machine,line,factory

Related information


How to choose high quality PLC control steel tube machine line

1. quality PLC control steel tube machine line see the manufacturer. Regular stainless steel pipe manufacturers usually have reliable raw material suppliers, mature management systems and R&D teams, and high-quality after-sales maintenance services;

2022-09-14

Advantages of stainless steel ERW tube making machine products

Stainless steel ERW tube making machine, a mechanical equipment for producing stainless steel pipes (such as: stair handrails, anti-theft doors and windows, bathroom pipes, heat exchanger pipes, automobile exhaust pipes, water pipes, chimney pipes, wall-hung boiler pipes, etc.), and Compared with seamless welded pipe units, what are the advantages of stainless steel ERW tube making machinery:

2022-08-11

How to properly operate stainless steel ERW tube making machine in China

So to speak! Stainless steel ERW tube making machines in China have different specifications and may operate differently. However, the operating principles of all machines and equipment are roughly the same. The first step is to test the equipment, the second step is to connect the power supply, and the third step is to perform operation skills according to work requirements. Basically all stainless steel ERW tube making machines in China follow these three steps.

2022-08-09

视频标题

Get a quote