The role of ERW tube making machine in the work is getting more and more attention, so how can we improve its working efficiency? ERW tube making machine factory believes that only by knowing how to maintain the pipe making machine can improve the efficiency. The following ERW tube making machine factory will share with you the maintenance experience of the pipe making machine.

　　1. Always check the oil level indicator on the oil tank of the ERW pipe, and the oil level should not be lower than the specified value.

　　2. When the fine oil filter is blocked by dirt, it needs to be replaced in time; when the coarse oil filter is blocked, it should be cleaned in time, once every 3 months.

　　3. Add oil to the oil tank of the ERW pipe, and filter it. The oil cannot be mixed with impurities such as water, rust, metal chips and fibers.

　　4. When starting the oil pump in winter or cold areas, it should start and stop, and repeat several times to make the oil temperature rise, and then start working after the hydraulic pump station operates flexibly.

　　5. All knobs on the hydraulic pump station shall not be moved by non-operators.

　　6. Always observe whether the power supply voltage of the ERW tube making machine has abnormal fluctuations, and repair it every 3 months or so.

　　Proper maintenance of the ERW tube making machine plays a very positive role in the efficiency and life of the equipment.