The steel coil slitting line is suitable for processing cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel and various metal materials after surface coating. It has a very high degree of automation, and the steel coil slitting line is easy to operate. . Next, let's take a look at the structural knowledge of the steel coil slitting line:

　　The steel coil slitting line consists of feeding trolley, double support uncoiler, feeding device, traction leveling machine, parallel shearing machine, swing bridge, deviation correction feeding device, slitting machine, waste edge winder, feeding rack, It consists of swing bridge, pre-distribution device, tensioner, feed roller, coiling shearing machine, steering drum, rear axle, winder, discharge trolley, auxiliary support for winding, hydraulic system and electrical system.

　　1. The distance between the steel coil slitting cutter shafts is a double eccentric adjustment type; 2. The upper and lower cutter shafts are driven by a DC motor, a reducer, a gear distribution box and a universal coupling; 3. The eccentric position of the gear sleeve is electrically adjusted by the worm gear and worm. Adjust the blade overlap by changing the distance between the cutter shafts; 4. The cutter shaft is equipped with multiple cutter discs and a series of spacers with different thicknesses, and the cutter discs and spacers are pressed by nuts; 5. The steel coil slitting cutter shaft support is Welding parts are movable on one side and fixed on the other side. When changing tools, the moving support is dragged in and out by the motor.

　　The steel coil slitting line can cut the metal strip very well. The quality is very high. The slitting line can improve the work efficiency and also improve the cutting accuracy and protect the sheet.